Suitable for : Grinding / polishing iron, stainless &
all types of metals Clean stains, rust and weld marks
- FEATURES
- Less clogged
- Lighter, less vibration, not noisy, stable balance
- Equipped with a layer of glass-fiber and a grinding plate
thinner so it is safer and longer lasting
| For General Steel & Stainless Steel / INOX | |||||||||
|---|---|---|---|---|---|---|---|---|---|
 |
CODE | SIZE | SPEC | MAX OPERATING SPEED | Inner Q'TY (pcs) | Outer Q'TY (pcs) | |||
| mm | inch | m/s | rpm (min-1) | ||||||
| Type-27 | UFD-100-A40 | 100x16 | 4"x5/8" | A40 | 72 | 13,700 | 10 | 100 | |
| UFD-100-A60 | 100x16 | 4"x5/8" | A60 | ||||||
| UFD-100-A80 | 100x16 | 4"x5/8" | A80 | ||||||
| UFD-100-Z40 | 100x16 | 4"x5/8" | Z40 | ||||||
| UFD-100-Z60 | 100x16 | 4"x5/8" | Z60 | ||||||
| UFD-100-Z80 | 100x16 | 4"x5/8" | Z80 | ||||||
- ( i ) = High grinding rate, rough finishing result.
- ( ii ) = Midium grinding, medium finishing.
- ( iii ) = Low grinding rate, fine finishing results.
| PICTOGRAM INFORMATION | |||||||
|---|---|---|---|---|---|---|---|
 |
Do not use if damaged | |
Wear ear protection |  |
Only to be used with a back-up pad |  |
Sanding |
 |
Do not use for face grinding | |
Wear eye protection | |
Grinding | |
Metal steel |
 |
Do not use with hand-held grinding machine | |
Wear a mask |  |
Cutting |  |
Stainless steel / INOX |
|
Refer to instruction manual | |
Wear protective gloves |  |
Polishing |  |
Masonry |
SAFETY FIRST
Always use properly guarded tools, follow maximum operating speed recommendation and wear proper face and body protection.