Suitable for :
Polishing & cutting non-ferrous metals
FRP (Fiberglass Reinforced Plastic)
PVC (Polyvinyl Chloride) & peeling paint
- FEATURES
- No clogging by improved glass fiber technology and new bonding system
- Suitable for the non ferrous metal, FRP and PVC uniform surface finish on flat
and curved workpiece light weight low vibration, small working noise
| For FRP (Fiberglass Reinforced Plastic) and PVC (Polyvinal Chloride) | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| CODE | SIZE | SPEC | MAX OPERATING SPEED | Inner Q'TY (pcs) | Outer Q'TY (pcs) | ||||
| mm | inch | m/s | rpm (min-1) | ||||||
| Type-27 | UN-100-2PC60 | 100x2Px16 | 4"x2Px5/8" | C60 | 80 | 15,300 | 20 | 200 | |
| PICTOGRAM INFORMATION | |||||||
|---|---|---|---|---|---|---|---|
 |
Do not use if damaged | |
Wear ear protection |  |
Only to be used with a back-up pad |  |
Sanding |
 |
Do not use for face grinding | |
Wear eye protection | |
Grinding |  |
Metal steel |
 |
Do not use with hand-held grinding machine | |
Wear a mask | |
Cutting |  |
Stainless steel / INOX |
|
Refer to instruction manual | |
Wear protective gloves | |
Polishing |  |
Masonry |
SAFETY FIRST
Always use properly guarded tools, follow maximum operating speed recommendation and wear proper face and body protection.